You don't find what you're looking for?? Do you need help to find a product that you cannot find on our website? You have doubts about an existing product?? Contact our team for advice on: info@carbon4us.com or by phone 0034 698 324 540
EVR Spacer for clutch actuator on Ducati. Made with high quality materials for Ducati models with a short clutch rod, such as Ducati models before 2000. Price by unit.
Original Ducati high sealed 11-7.5 cm green rubber O-ring for primary clutch nut.
Ducati Performance steel spring for Ducati Original dry clutch. Price per unit
Original clutch actuator 79910121A spring for Ducati. High strength and sportier performances for your Ducati clutch. It replaces the original one without changes to make.
Genuine Ducati clutch spring retainer. Made of resistant materials for optimal performance. Price by unit.
CNC Racing anti-corrosion stainless steel screws kit for Ducati dry clutch cover. Replace the original.
CNC Racing Fluid reservoir mounting bracket for Ducati. Made of AISI304 stainless steel for easy mounting of the brake and clutch fluid reservoir.
Separating O-Ring for dry clutch covers on Ducati, original or not, closed or open. Separates the cover from the clutch pressure plate. Can be cut for using only a part of it.
EVR stainless steel hardware kit for Ducati dry clutches. This high strength kit is definitive remedy to make your motorcycle clutch look always new...
Slave Clutch drain screw Ducati OEM for original master cylinders and other brands. Unit price - SKU : 77910821AC
Rolling bearing for Ducati dry clutch rod. Maximum capacity of bearing and duration of use.
Rod bearing for Ducati dry clutch rod by CNC Racing. Maximum capacity of bearing and duration of use. It replaces the original part without the need for any modification, also assuming an improvement in its behavior and greater durability.
Slave Clutch drain genuine screw Ducati OEM for original master cylinders and other brands. Unit price - Replaces the genuine SKU : 77910821AB
Brembo rear brake and clutch fluid reservoir, 12cc capacity. Made of smoked transparent plastic compound for Ducati. Bottom 45° outflow. SKU : 10444653
Bowden wire repair kit for Ducati. valid to repair the clutch, brake or throttle saw in a simple, economical and reliable way. In a convenient can for storage that includes several regulators for total compatibility.
Brembo brake and clutch fluid reservoir, 15ml capacity, vertical output. Made of transparent plastic compound for Ducati. Bottom 180° outflow
Original Ducati OEM rubber pressure rod. 100% genuine Ducati spare part. Compatible with various models. Price by unit.
Ducati Performance Original dry clutch cover seal ring.
Carbon4us kit of 5 reinforced clutch springs for Ducati. Compatible with several models. They provide 10% more hardness than the original springs. Made of steel.
Ducabike full kit of 6 springs for Ducati dry clutch. Made of steel with gelcoat recovery surface. Available in a large range of colours.
Ducabike kit of 6 dry clutch caps for Ducati. Machined from a solid block of aluminium with subsequent anodized surface in different colours.
Carbon4us kit of 6 reinforced clutch springs for Ducati. Compatible with several models. They provide 10% more hardness than the original springs. Made of steel.
Kit of spring retainers in ergal by the prestige brand EVR for Ducati dry clutch. Essential for a successful operation of the clutch. Available in red, black, gold or silver colour.
A stylish black brake and clutch lever for Ducati motorcycles, designed by the prestigious brand Carbon4us. This high-quality lever serves as a direct replacement for the original reference 62610021A on your Ducati, allowing you to upgrade without the need for modifications.
Brake and clutch fluid reservoir cap CNC Racing for Ducati. Machined from aluminum alloy, anodized in various colors. The best quality for your Ducati. *Exclusively compatible with the CNC Racing SEB12 brake and clutch fluid reservoir.
Brake and clutch fluid reservoir cap CNC Racing for Ducati. Machined from aluminum alloy, anodized in various colors. The best quality for your Ducati. *Exclusively compatible with the CNC Racing SEB25 brake and clutch fluid reservoir.
Set of CNC Racing caps for Ducati dry clutch. Machined from solid aluminum alloy with anodized surface in a choice of colours. Change the aethetics of your Ducati with this product "Made in Italy".
Ducati Dry clutch stainless steel springs by the prestige brand EVR.
Stainless steel caps and screws for dry clutch. This high quality product will enhance the look of your Ducati clutch. The kit contains 6 caps and their corresponding screws, replacing the iron original ones. Available in various colours.
Tool to fix the clutch bell of Ducati models with dry clutch. Repair your clutch in a professional way. *This tool is necessary in order to loosen the central nut
Ducabike Clutch pump oil tank kit, high quality and easy assembly on some Ducati models. Includes everything you need to mount it on the PT Ducabike clutch master cylinder. Kit contains: - Complete tank with cap (45cc) - Mounting bracket - Rubber hose - Screws and pipe fittings.
CNC Racing dry clutch springs constructed stainless material that won't rust and will maintain its properties despite the passage of time.
Ducati Full kit dry clutch springs, in chrome silicon with a special heat treatment to ensure its durability. They are also developed together with racing teams to improve pressure 15-35% more than the series springs.
This product has been manufactured using a CNC machine from light alloy billet and then given a coloured anodized surface finish.The innovative tooling of our new Streaks Line gives it a matchless appearence.
Clutch fluid reservoir cap CNC Racing Touch for Ducati Manufactured using a CNC machine from light alloy billet and then given a coloured anodized surface finish.The innovative tooling of our new Bicolor Line gives it a matchless appearence.
CNC Racing clutch fluid reservoir cap machined from solid alloy and then anodized surface. Designed for sporty effect, this high quality item pleasantly improves the aesthetics of the bike handlebar.
Original clutch rod for Ducati (<2001). Includes the rod seals. Before 2001 rod : 32,5mm.
Original Ducati OEM dry clutch rod (>2001). Includes the rod seals. Rod : 33.2mm. Replaces the genuine SKU: 11720061A, 11720062A, 11721121A